JSJSLW500 Link not working

  • October 24, 2018 at 16:15 #25440
    Nigels0
    Participant

    Hi,

    My Link isn’t working any more – not that I’ve been using it for quite some time as I’m using Domoticz to handle the switches.

    On plugging into the power, I get the display alternating between V2 Meter V2.94D and Lightwave V2.94D – the buttons aren’t responsive and the ethernet plug lights are out.

    Any ideas on how to reset/fix this issue?

    Regards

    October 25, 2018 at 08:15 #25441
    btidey
    Participant

    First thing to check is the power supply. This has been known to pack up or give low voltage.

    If you have a meter check the voltage on the barrel. It should be around 12V.

    If power is the problem you can use any other 12V supply capable of giving 1A. These are available on line at low cost.

    See https://staging.lightwaverfcommunity.org.uk/forums/topic/replacement-adapter-for-lw500wh-link/

    October 25, 2018 at 08:51 #25442
    Nigels0
    Participant

    Yes, was the PSU – the amps were all over the place (although it gave out 12v. Thanks.

You must be logged in to reply to this topic.